300W Electric DIY Heat Gun Hot Air Gun For Crafts Epoxy Resin Shrink Wrap Viny

Brand New,Premium Quality
NZ stock and Shipped from Auckland
Free shipping within New Zealand
Quantity:1
Warranty: 6 month
Photo is for reference only

- Hot Air Gun
- Features
It can be used to heating relief powder and shrinkable sheet
Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.
After completion, use the heat gun at high temperature to blow a few seconds
It not only can add its hardness, but also its brightness
The temperature can not adjustable, in theory, it can reach at 200 degree within a few seconds
Do not work over 8 minutes, blow at 45 degree angle to avoid heat suck

Notes:
1.Be careful when using the hot air gun
2.This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, rubber stamp,embossed powder, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
2. This kind of gun can not adjust the temperature but it heats up quickly at about 200℃ theoretically. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.

Specification:
- Material: ABS
- Size: 22.5*4.5cm
- Type: Constant temperature
- Working temperature: It can reach at about 200°C（392°F） within a few seconds
- Rated power: 300W
- Power type: NZ Plug
- Rated voltage: 220v
- Working time: 8 minutes

Usage:
1.Plug in the heat tool
2.Hold the gun but do not touch the hot nozzle
3.Keep 3-5cm distance between the heat gun and your work, about 45° for heating until the completion of the work
4.Turn off the power to stay cool